This site is from a past semester! The current version will be here when the new semester starts.

tP: DeliverablestP: Grading


tP: Practical Exam

tP: Practical Exam Dry Run (PE-D)

PE-D Overview

What: The latest release of the v2.0 period is subjected to a round of peer acceptance/system testing, also called the Practical Exam (PE) Dry Run as this round of testing will be similar to the graded Practical Exam that will be done at v2.1.

When, where: uses a 40 minute slot at the start of week 11 lecture slot (to be done online).

Grading: The PE dry run affects your grade in the following ways.

  • If you scored less than half of the marks in the PE, we will consider your performance in PE dry run as well when calculating the PE marks.
  • PE dry run is a way for you to practice for the actual PE.
  • Taking part in the PE dry run will earn you participation points.
  • There is no penalty for bugs reported in your product. Every bug you find is a win-win for you and the team whose product you are testing.

Why:

  • To train you to do manual testing, bug reporting, bug assigning of priority ordertriaging, bug fixing, communicating with users/testers/developers, evaluating products etc.
  • To help you improve your product before the final submission.

PE-D Preparation

  • Ensure that you have accepted the invitation to join the GitHub org used by the module. Go to https://github.com/nus-cs2113-AY2122S1 to accept the invitation.

  • Ensure you have access to a computer that is able to run module projects e.g. has the right Java version.

  • Ensure CATcher works on your computer. You should have done this when you smoke-tested CATcher earlier.

  • Have a good screen grab tool with annotation features so that you can quickly take a screenshot of a bug, annotate it, and post in the issue tracker.
    You can use Ctrl+V to paste a picture from the clipboard into a text box in a bug report.

  • [Optional] Have a good screen recording tool if you plan to use screen recording clips as part of your bug reports. Ensure that your screen recording tool can create small files as CATcher doesn't allow files bigger than 10Mb.
    As the CATcher support for uploading screen recordings is new and limited, use it only if strictly necessary -- use screenshots for other cases.

  • Download the product to be tested.

  • After you have been notified which team to test (likely to be in the morning of PE-D day), download the latest JAR file from the team's releases page.

  • After you have been notified of the download location, download the zip file that bears your name.

Testing tips

Use easy-to-remember patterns in test data. For example, if you use 12345678 as a phone number while testing and it appears as 2345678 somewhere else in the UI, you can easily spot that the first digit has gone missing. But if you used a random number instead, detecting that bug won't be as easy. Similarly, if you use Alice Bee, Benny Lee, Charles Pereira as test data (note how the names start with letters A, B, C), it will be easy to detect if one goes missing, or they appear in the incorrect order.

Go wide before you go deep. Do a light testing of all features first. That will give you a better idea of which features are likely to be more buggy. Spending equal time for all features or testing in the order the features appear in the UG is not always the best approach.

PE-D During the session

Use the CATcher Web app for reporting bugs.

Use MS Teams (not Zoom) to contact prof if you need help during the session. Use Zoom chat only if you don't get a response via MS Teams.

How many bugs to report?

Report as many bugs as you can find during the given time. Take longer if you need. If you can't find many bugs at this stage when the product is largely untested, you are unlikely to be able to find enough bugs in the better-tested final submission later. In that case, all the more reasons to spend more time and find more bugs now.

Bug reports marked as invalid by the receiving team later will not count for credit.

The median number of bugs reported in the previous semester's PED was 9. Someone reporting just a 2-3 bugs is usually a sign of a half-hearted attempt rather than lack of bugs to find. If you really can't find bugs, at least submit suggestions for improvements.

PE and PE-D are manual testing sessions. Using test automation tools or scripting is not allowed.

Test the product and report bugs as described below, when the prof informs you to begin testing.

Testing instructions for PE and PE-D
a) Launching the JAR file
  • Get the jar file to be tested:
  • Download the latest JAR file from the team's releases page, if you haven't done this already.

  • Download the zip file from the given location, if you haven't done that already.
  • Unzip the downloaded zip file with the password (to be given to you at the start of the PE, via LumiNUS gradebook). This will give you another zip file with the name suffix _inner.zip.
  • Unzip the inner zip file. This will give you the JAR file and other PDF files needed for the PE. Warning: do not run the JAR file while it is still inside the zip file.

  • Put the JAR file in an empty folder in which the app is allowed to create files (i.e., do not use a write-protected folder).
    In rare cases, the team could have submitted a ZIP file instead of a JAR file. In that case, unzip that file into the target folder.
  • Open a command window. Run the java -version command to ensure you are using Java 11.
  • Check the UG to see if there are extra things you need to do before launching the JAR file e.g., download another file from somewhere
    You may visit the team's releases page on GitHub if they have provided some extra files you need to download.
  • Launch the jar file using the java -jar command rather than double-clicking (reason: to ensure the jar file is using the same java version that you verified above). Use double-clicking as a last resort.
    If you are on Windows, use the DOS prompt or the PowerShell (not the WSL terminal) to run the JAR file.
    If the JAR file name has spaces in it, remember to surround it with double quotes.
    e.g., java -jar "Name With Spaces.jar"
  • If the product doesn't work at all: If the product fails catastrophically e.g., cannot even launch, or even the basic commands crash the app, contact the invigilator (via MS Teams, and failing that, via Zoom chat) to receive a fallback team to test.
b) What to test
  • Test the product based on the User Guide available from their GitHub website https://{team-id}.github.io/tp/UserGuide.html.
  • Do system testing first i.e., does the product work as specified by the documentation?. If there is time left, you can do acceptance testing as well i.e., does the product solve the problem it claims to solve?.

  • Test based on the Developer Guide (Appendix named Instructions for Manual Testing) and the User Guide. The testing instructions in the Developer Guide can provide you some guidance but if you follow those instructions strictly, you are unlikely to find many bugs. You can deviate from the instructions to probe areas that are more likely to have bugs.
  • As before, do both system testing and acceptance testing but give priority to system testing as those bugs can earn you more credit.
  • Be careful when copying commands from the UG (PDF version) to the software as some PDF viewers can affect the pasted text. If that happens, you might want to open the UG in a different PDF viewer.

c) What bugs to report?
  • You may report functionality bugs, UG bugs, and feature flaws.

  • You can also post suggestions on how to improve the product.
    Be diplomatic when reporting bugs or suggesting improvements. For example, instead of criticising the current behavior, simply suggest alternatives to consider.

  • Report functionality bugs:

  • Do not post suggestions but if the product is missing a critical functionality that makes the product less useful to the intended user, it can be reported as a bug of type Type.FeatureFlaw. The dev team is allowed to reject bug reports framed as mere suggestions or/and lacking in a convincing justification as to why the omission of that functionality is problematic.

  • You may also report UG bugs.


d) How to report bugs
  • Post bugs as you find them (i.e., do not wait to post all bugs at the end) because bug reports created/modified after the allocated time will not count.
  • Launch CATcher, and login to the correct profile:
    • PE Dry Run: CS2113/T PE Dry run
    • PE: CS2113/T PE
  • Post bugs using CATcher.

Issues created for PE-D and PE need to be in a precise format for our grading scripts to work. Incorrectly-formatted responses will have to discarded. Therefore, you are not allowed to use the GitHub interface for PE-D and PE activities, unless you have obtained our permission first.

  • Post bug reports in the following repo you created earlier:
    • PE Dry Run: ped
    • PE: pe
  • The whole description of the bug should be in the issue description i.e., do not add comments to the issue.

e) Bug report format
  • Each bug should be a separate issue i.e., do not report multiple problems in the same bug report.
  • Write good quality bug reports; poor quality or incorrect bug reports will not earn credit.
  • Use a descriptive title.
  • Give a good description of the bug with steps to reproduce, expected, actual, and screenshots. If the receiving team cannot reproduce the bug, you will not be able to get credit for it.
  • Assign exactly one severity.* label to the bug report. Bug report without a severity label are considered severity.Low (lower severity bugs earn lower credit)

Bug Severity labels:

  • severity.VeryLow : A flaw that is purely cosmetic and does not affect usage e.g., a typo/spacing/layout/color/font issues in the docs or the UI that doesn't affect usage. Only cosmetic problems should have this label.
  • severity.Low : A flaw that is unlikely to affect normal operations of the product. Appears only in very rare situations and causes a minor inconvenience only.
  • severity.Medium : A flaw that causes occasional inconvenience to some users but they can continue to use the product.
  • severity.High : A flaw that affects most users and causes major problems for users. i.e., makes the product almost unusable for most users.

When applying for documentation bugs, replace user with reader.

  • Assign exactly one type.* label to the issue.

Type labels:

  • type.FunctionalityBug: A functionality does not work as specified/expected.
  • type.FeatureFlaw: Some functionality missing from a feature delivered in v2.1 in a way that the feature becomes less useful to the intended target user for normal usage. i.e., the feature is not 'complete'. In other words, an acceptance-testing bug that falls within the scope of v2.1 features. These issues are counted against the product design aspect of the project.
    Features that work as specified by the UG but should have been designed to work differently (from the end-user's point of view) fall in this category too.
  • type.DocumentationBug: A flaw in the documentation e.g., a missing step, a wrong instruction, typos

PE-D After the session

  • The relevant bug reports will be transferred to your issue tracker within a day after the session is over. Once you have received the bug reports for your product, you can decide whether you will act on reported issues before the final submission v2.1. For some issues, the correct decision could be to reject or postpone to a version beyond v2.1.
    Reminder: There is no penalty for any of the bugs you received in the PE-D.
  • If you have received stray bug reports (i.e., bug reports that don't seem to be about your project), do let us know ASAP (email the prof).
  • You can navigate to the original bug report (via the back-link provided in the bug report given to you) and post in that issue thread to communicate with the tester who reported the bug e.g. to ask for more info, etc. However, the tester is not obliged to respond. Note that simply replying to the bug report in your own repo will not notify the tester.
    • Do not argue with the tester to try to convince that person that your way is correct/better. If at all, you can gently explain the rationale for the current behavior but do not waste time getting involved in long arguments. If you think the suggestion/bug is unreasonable, just thank the tester for their view and discontinue to discussion.
  • If you have received 'insincere' bug reports that seem like just an attempt to increase the tester's bug count, please let us know.
    As for the other bug reports, you can deal with them as you see fit (i.e., triage, apply labels, assign, close etc.).
  • You may ignore type/severity.* labels given by the tester. They will not affect you or the tester either way -- they were there just for the testers to practice. You may apply your own type/severity labels if you wish.

Note that listing bugs as 'known bugs' in the UG or specifying unreasonable constraints in the UG to make bugs 'out of scope' will not exempt those bugs from the final grading. That is, PE testers can still earn credit for reporting those bugs and you will still be penalized for them.
However, a product is allowed to have 'known limitations' (e.g., a daily expense tracking application meant for students is unable to handle expenses larger than $999) as long as they don't degrade the product's use within the intended scope. They will not be penalized.

Identify bugs you missed in the PE-D: Visit the issue tracker of the team you tested and see bugs reported by others who tested the same product. Identify bugs you missed (if any). That knowledge might help you find similar bugs in your own product as well as find more bugs during the PE.

tP: Practical Exam (PE)

PE Overview

  • The upfront objective of the PE is to increase the rigor of project grading. Assessing most aspects of the project involves an element subjectivity. As the project counts for a large percentage of the final grade, it is not prudent to rely on evaluations of tutors alone as there can be significant variations between how different tutors assess projects. That is why we collect more data points via the PE so as to minimize the chance of your project being affected by evaluator-bias.

  • PE mainly evaluates your testing skills, done as the following two-parts:

    1. You will be given a chance to find bugs in a different software. Furthermore, you will be given an opportunity to defend your bug reports against any possible objections. If you can successfully find bugs and defend them against any objections, you earn marks (provided the product actually had bugs in the first place).
    2. Your product will be subjected to a rigorous testing and you will be given a chance to object to any bugs reported. You will lose marks for any bugs that turned out to be real bugs, but only if your work has more bugs than a certain bar.
  • The above two can lead to high-rigor, based on how well you achieve the objectives of testing, as opposed to indirect measures such as number of test casesoutcome-based evaluation of your testing skills. The alternative is to rely solely on other easy-to-measure metrics (e.g., the number of test cases, test coverage, test LoC etc.) which we don't think is right, given how important the testing aspect is. The ultimate objective of the PE is not even the higher rigor of grading. Because of the PE, you will realize that any bugs are very likely to be detected, which means you will work extra hard to avoid bugs; and THAT is the real benefit.

  • Problem: There is no way we can carry out the above-mentioned two-part evaluation at a high-level of rigor if using tutors as testers, or using an automated testing script. e.g., some tutors might not have the motivation to try hard enough to find bugs, and it will be hard to find tutors willing to spend many hours testing products so near to their own exams.
    Solution: Get the two parts of the evaluation to feed each other by getting student to test each others' products.

  • The fact that you are testing products created by your classmates and objecting to bugs reported by your classmates can makes this a rather 'unpleasant' experience. You might feel like being pitted against each other, or as if you are forced to bring down each other. But as you read above, it is a necessary evil for this evaluation to be even possible. Given the actual goal is to get you to create products with very few bugs, we think switching off the 'collaborative learning' mode for just a few days is a price worth paying to achieve that goal. After all, the PE is an evaluation activity (not a learning activity) and happens after the regular learning period is over.

  • You are not taking marks from someone else -- at least, don't think of it that way. The point of contention is 'is this really a bug?' which is independent of the people involved. Furthermore, the reward for detecting a bug and the penalty for having a bug in your code are calculated independently.

  • Still, none of us likes it when others point out problems of our work. Some of us don't even like pointing out problems of others' work. But we just have to learn not to take bug reports personally. Another important lesson is to learn how to report bugs in a way that doesn't feel like you are attacking or trying to sabotage the dev team.

  • PE also evaluates aspects other than testing e.g., your product evaluation skills, effort estimation skills etc. When evaluating those aspects in particular, they not graded solely based on peer ratings. Rather, PE data are cross-validated with tutors' grades to identify cases that need further investigation. When peer inputs are used for grading, they are usually combined with tutors' grades with appropriate weight for each. In some cases ratings from team members are given a higher weight compared to ratings from other peers, if that is appropriate.

  • Grading:

    • Your performance in the practical exam will affect your final grade and your peers', as explained in Admin: Project Grading section.
    • As such, we have put in measures to identify and penalize insincere/random evaluations.
    • Also see:

PE Preparation

  • It's similar to,

PE Phase 1: Bug Reporting

  • When: Last lecture slot of the semester (Fri, Nov 12th ). Remember to join 15-30 minutes earlier than usual lecture start time. The Zoom link will be given to you closer to the day.

PE Phase 1 will conducted under exam conditions. We will be following the SoC's E-Exam SOP, combined with the deviations/refinements given below. Any non-compliance will be dealt with similar to a non-compliance in the final exam.

  • Proctoring will be done via Zoom. No admission if the following requirements are not met.
    • You will be notified of the zoom session that you should log in at least 1 day in advance via LumiNUS. Remember: we will NOT use the same zoom session as the lectures
    • You need two Zoom devices (PC: chat, audio video, Phone: video, audio), unless you have an external web cam for your PC.
    • Set your zoom display name to show your actual name as shown on LumiNUS.
    • Add [PC] in front of the first name of your zoom display name on the pc.
      • E.g., John Doe (for the zoom session connected via the phone)
      • [PC] John Doe (for the zoom session on PC)
    • Set your camera so that all the following are visible:
      1. your face (side view, no mask)
      2. your hands
      3. the work area (i.e., the table top)
      4. the computer screen
  • Join the Zoom waiting room 15-30 minutes before the start time. Admitting you to the Zoom session can take some time.
  • In case of Zoom outage, we'll fall back on MS Teams (MST). Make sure you have MST running; proctoring will be done via individual tutorial MST teams that we have been using.
  • Recording the screen is not required.
  • You are allowed to use head/ear phones.
  • Only one screen is allowed. If you want to use the secondary monitor, you should switch off the primary monitor. The screen being used should be fully visible in the Zoom camera view.
  • Do not use the public chat channel to ask questions from the prof. If you do, you might accidentally reveal which team you are testing.
  • Do not use more than one CATcher instance at the same time. Our grading scripts will red-flag you if you use multiple CATcher instances in parallel.
  • Use MS Teams (not Zoom) private messages to communicate with the prof.
  • Do not view video Zoom feeds of others while the testing is ongoing. Keep the video view minimized.
  • During the bug reporting periods (i.e., PE Phase 1 - part I and PE Phase 1 - part II), do not use websites/software not in the list given below. In particular, do not visit GitHub. However, you are allowed to visit pages linked in the UG/DG for the purpose of checking if the link is correct. If you need to visit a different website or use another software, please ask for permission first.
    • Website: LumiNUS
    • Website: Module website (e.g., to look up PE info)
    • Software: CATcher, any text editor, any screen grab/recording software
    • Software: PDF reader (to read the UG/DG or other references such as the textbook)
    • Software: A text editor (to keep track of commands you tried)
  • Do not use any other software running in the background e.g., Telegram chat.
  • This is a manual testing session. Do not use any test automation tools or custom scripts.
PE Phase 1 - Part I Product Testing [60 minutes]

Bonus marks for high accuracy rates!

You will receive bonus marks if a high percentage (e.g., >70%) of your bugs are accepted as reported (i.e., the eventual type.* and severity.* of the bug match the values you chose initially and the bug is accepted by the team).

Test the product and report bugs as described below. You may report both product bugs and documentation bugs during this period.

Testing instructions for PE and PE-D
a) Launching the JAR file
  • Get the jar file to be tested:
  • Download the latest JAR file from the team's releases page, if you haven't done this already.

  • Download the zip file from the given location, if you haven't done that already.
  • Unzip the downloaded zip file with the password (to be given to you at the start of the PE, via LumiNUS gradebook). This will give you another zip file with the name suffix _inner.zip.
  • Unzip the inner zip file. This will give you the JAR file and other PDF files needed for the PE. Warning: do not run the JAR file while it is still inside the zip file.

  • Put the JAR file in an empty folder in which the app is allowed to create files (i.e., do not use a write-protected folder).
    In rare cases, the team could have submitted a ZIP file instead of a JAR file. In that case, unzip that file into the target folder.
  • Open a command window. Run the java -version command to ensure you are using Java 11.
  • Check the UG to see if there are extra things you need to do before launching the JAR file e.g., download another file from somewhere
    You may visit the team's releases page on GitHub if they have provided some extra files you need to download.
  • Launch the jar file using the java -jar command rather than double-clicking (reason: to ensure the jar file is using the same java version that you verified above). Use double-clicking as a last resort.
    If you are on Windows, use the DOS prompt or the PowerShell (not the WSL terminal) to run the JAR file.
    If the JAR file name has spaces in it, remember to surround it with double quotes.
    e.g., java -jar "Name With Spaces.jar"
  • If the product doesn't work at all: If the product fails catastrophically e.g., cannot even launch, or even the basic commands crash the app, contact the invigilator (via MS Teams, and failing that, via Zoom chat) to receive a fallback team to test.
b) What to test
  • Test the product based on the User Guide available from their GitHub website https://{team-id}.github.io/tp/UserGuide.html.
  • Do system testing first i.e., does the product work as specified by the documentation?. If there is time left, you can do acceptance testing as well i.e., does the product solve the problem it claims to solve?.

  • Test based on the Developer Guide (Appendix named Instructions for Manual Testing) and the User Guide. The testing instructions in the Developer Guide can provide you some guidance but if you follow those instructions strictly, you are unlikely to find many bugs. You can deviate from the instructions to probe areas that are more likely to have bugs.
  • As before, do both system testing and acceptance testing but give priority to system testing as those bugs can earn you more credit.
  • Be careful when copying commands from the UG (PDF version) to the software as some PDF viewers can affect the pasted text. If that happens, you might want to open the UG in a different PDF viewer.

c) What bugs to report?
  • You may report functionality bugs, UG bugs, and feature flaws.

  • You can also post suggestions on how to improve the product.
    Be diplomatic when reporting bugs or suggesting improvements. For example, instead of criticising the current behavior, simply suggest alternatives to consider.

  • Report functionality bugs:

  • Do not post suggestions but if the product is missing a critical functionality that makes the product less useful to the intended user, it can be reported as a bug of type Type.FeatureFlaw. The dev team is allowed to reject bug reports framed as mere suggestions or/and lacking in a convincing justification as to why the omission of that functionality is problematic.

  • You may also report UG bugs.


d) How to report bugs
  • Post bugs as you find them (i.e., do not wait to post all bugs at the end) because bug reports created/modified after the allocated time will not count.
  • Launch CATcher, and login to the correct profile:
    • PE Dry Run: CS2113/T PE Dry run
    • PE: CS2113/T PE
  • Post bugs using CATcher.

Issues created for PE-D and PE need to be in a precise format for our grading scripts to work. Incorrectly-formatted responses will have to discarded. Therefore, you are not allowed to use the GitHub interface for PE-D and PE activities, unless you have obtained our permission first.

  • Post bug reports in the following repo you created earlier:
    • PE Dry Run: ped
    • PE: pe
  • The whole description of the bug should be in the issue description i.e., do not add comments to the issue.

e) Bug report format
  • Each bug should be a separate issue i.e., do not report multiple problems in the same bug report.
  • Write good quality bug reports; poor quality or incorrect bug reports will not earn credit.
  • Use a descriptive title.
  • Give a good description of the bug with steps to reproduce, expected, actual, and screenshots. If the receiving team cannot reproduce the bug, you will not be able to get credit for it.
  • Assign exactly one severity.* label to the bug report. Bug report without a severity label are considered severity.Low (lower severity bugs earn lower credit)

Bug Severity labels:

  • severity.VeryLow : A flaw that is purely cosmetic and does not affect usage e.g., a typo/spacing/layout/color/font issues in the docs or the UI that doesn't affect usage. Only cosmetic problems should have this label.
  • severity.Low : A flaw that is unlikely to affect normal operations of the product. Appears only in very rare situations and causes a minor inconvenience only.
  • severity.Medium : A flaw that causes occasional inconvenience to some users but they can continue to use the product.
  • severity.High : A flaw that affects most users and causes major problems for users. i.e., makes the product almost unusable for most users.

When applying for documentation bugs, replace user with reader.

  • Assign exactly one type.* label to the issue.

Type labels:

  • type.FunctionalityBug: A functionality does not work as specified/expected.
  • type.FeatureFlaw: Some functionality missing from a feature delivered in v2.1 in a way that the feature becomes less useful to the intended target user for normal usage. i.e., the feature is not 'complete'. In other words, an acceptance-testing bug that falls within the scope of v2.1 features. These issues are counted against the product design aspect of the project.
    Features that work as specified by the UG but should have been designed to work differently (from the end-user's point of view) fall in this category too.
  • type.DocumentationBug: A flaw in the documentation e.g., a missing step, a wrong instruction, typos
PE Phase 1 - Part II Evaluating Documents [30 minutes]
  • This slot is for reporting documentation bugs only. You may report bugs related to the UG and the DG.
    Only the content of the UG/DG PDF files (not the online version) should be considered.
  • For each bug reported, cite evidence and justify. For example, if you think the explanation of a feature is too brief, explain what information is missing and why the omission hinders the reader.

  • You may visit the team's project on GitHub during this phase, for the purpose of verifying the accuracy of documentation e.g., to check if a diagram matches the code
PE Phase 1 - Part III Overall Evaluation [15 minutes]
  • To be submitted via TEAMMATES. You are recommended to complete this during the PE session itself, but you have until the end of the day to submit (or revise) your submissions.
Important questions included in the evaluation:

Q Quality of the product design,
Evaluate based on the User Guide and the actual product behavior.

Criterion Unable to judge Low Medium High
target user Not specified Clearly specified and narrowed down appropriately
value proposition Not specified The value to target user is low. App is not worth using Some small group of target users might find the app worth using Most of the target users are likely to find the app worth using
optimized for target user Not enough focus for CLI users Mostly CLI-based, but cumbersome to use most of the time Feels like a fast typist can be more productive with the app, compared to an equivalent GUI app without a CLI
feature-fit Many of the features don't fit with others Most features fit together but a few may be possible misfits All features fit together to for a cohesive whole

Q Compared to AddressBoook-Level3 (AB3), the overall quality of the UG you evaluated is,
Evaluate based on fit-for-purpose, from the perspective of a target user. For reference, the AB3 UG is here.

Q Compared to AB3, the overall quality of the DG you evaluated is,
Evaluate based on fit-for-purpose from the perspective of a new team member trying to understand the product's internal design by reading the DG. For reference, the AB3 DG is here.

Q [For each member] The functional code contributed by the person is,
Consider implementation work only (i.e., exclude testing, documentation, project management etc.)
The typical iP refers to an iP where all the requirements are met at the minimal expectations given.
Use the person's PPP and RepoSense page to evaluate the effort.

Q [Optional] Concerns or any noteworthy observations about the product you evaluated

PE Phase 2: Developer Response

Deadline: Mon, Nov 15th 2359

This phase is for you to respond to the bug reports you received.

Bonus marks for high accuracy rates!

You will receive bonus marks if a high percentage (e.g., >80%) of bugs are accepted as triaged (i.e., the eventual type.*, severity.*, and response.* of the bug match the ones you chose).

Duration: The review period will start around 1 day after the PE and will last for 2-3 days (exact times will be announced later). However, you are recommended to finish this task ASAP, to minimize cutting into your exam preparation work.

Bug reviewing is recommended to be done as a team as some of the decisions need team consensus.

Instructions for Reviewing Bug Reports

  • Don't freak out if there are lot of bug reports. Many can be duplicates and some can be false positives. In any case, we anticipate that all of these products will have some bugs and our penalty for bugs is not harsh. Furthermore, it depends on the severity of the bug. Some bug may not even be penalized.
  • As mentioned earlier, the penalty for having a specific bug is not the same as the reward for reporting that bug (it's not a zero-sum game). For example, the reward for testers will be higher (because we don't expect the products to have that many bugs after they have gone through so much prior testing)

Penalty for a minor bug (e.g., an indicative value only; the actual value depends on the severity, type, and the number of assignees-0.15) is unlikely to make a difference in your final grade, especially given that the penalty applies only if you have more than a certain amount of bugs.

For example, in a typical case a developer might assigned 5+ severity.VeryLow bugs before the penalty even starts affecting their marks.

Accordingly, we hope you'll accept bug reports graciously (rather than fight tooth-and-nail to reject every bug report received) if you think the bug is within the ballpark of 'reasonable'. Those minor bugs are really not worth stressing/fighting over.

  • CATcher does not come with a UG, but the UI is fairly intuitive (there are tool tips too). Do post in the forum if you need any guidance with its usage.
  • Also note that CATcher hasn't been battle-tested for this phase, in particular, w.r.t. multiple team members editing the same issue concurrently. It is ideal if the team members get together and work through the issues together. If you think others might be editing the same issues at the same time, use the Sync button at the top to force-sync your view with the latest data from GitHub.
  • Go to CATcher Web app, and login to the profile CS2113/T PE. It will show all the bugs assigned to your team, divided into three sections:
    1. Issues Pending Responses - Issues that your team has not processed yet.
    2. Issues Responded - Your job is to get all issues to this category.
    3. Faulty Issues - e.g., Bugs marked as duplicates of each other, or causing circular duplicate relationships. Fix the problem given so that no issues remain in this category.
  • Respond to the bug reports shown.

You must use CATcher. You are strictly prohibited from editing PE bug reports using the GitHub Web interface as it can can render bug reports unprocessable by CATcher, sometimes in an irreversible ways, and can affect the entire class. Please contact the prof if you are unable to use CATcher for some reason.


  • If a bug seems to be for a different product (i.e. wrongly assigned to your team), let us know ASAP.
  • If the bug is reported multiple times,
    • Mark all copies EXCEPT one as duplicates of the one left out (let's call that one the original) using the A Duplicate of tick box.
    • For each group of duplicates, all duplicates should point to one original i.e., no multiple levels of duplicates, and no cyclical duplication relationships.
    • If the duplication status is eventually accepted, all duplicates will be assumed to have inherited the type.* and severity.* from the original.

  • Apply one of these labels (if missing, we assign: response.Accepted)

Response Labels:

  • response.Accepted: You accept it as a bug.
  • response.NotInScope: It is a valid issue but not something the team should be penalized for e.g., it was not related to features delivered in v2.1.
  • response.Rejected: What tester treated as a bug is in fact the expected and correct behavior (from the user's point of view), or the tester was mistaken in some other way.
  • response.CannotReproduce: You are unable to reproduce the behavior reported in the bug after multiple tries.
  • response.IssueUnclear: The issue description is not clear. Don't post comments asking the tester to give more info. The tester will not be able to see those comments because the bug reports are anonymous.

Only the response.Accepted bugs are counted against the dev team. While response.NotInScope are not counted against the dev team, they can earn a small amount of consolation marks for the tester. The other three do not affect marks of either the dev team or the tester, except when calculating bonus marks for accuracy.

  • If you disagree with the original bug type assigned to the bug, you may change it to the correct type.

Type labels:

  • type.FunctionalityBug: A functionality does not work as specified/expected.
  • type.FeatureFlaw: Some functionality missing from a feature delivered in v2.1 in a way that the feature becomes less useful to the intended target user for normal usage. i.e., the feature is not 'complete'. In other words, an acceptance-testing bug that falls within the scope of v2.1 features. These issues are counted against the product design aspect of the project.
    Features that work as specified by the UG but should have been designed to work differently (from the end-user's point of view) fall in this category too.
  • type.DocumentationBug: A flaw in the documentation e.g., a missing step, a wrong instruction, typos
  • If you disagree with the original severity assigned to the bug, you may change it to the correct level.

Bug Severity labels:

  • severity.VeryLow : A flaw that is purely cosmetic and does not affect usage e.g., a typo/spacing/layout/color/font issues in the docs or the UI that doesn't affect usage. Only cosmetic problems should have this label.
  • severity.Low : A flaw that is unlikely to affect normal operations of the product. Appears only in very rare situations and causes a minor inconvenience only.
  • severity.Medium : A flaw that causes occasional inconvenience to some users but they can continue to use the product.
  • severity.High : A flaw that affects most users and causes major problems for users. i.e., makes the product almost unusable for most users.

When applying for documentation bugs, replace user with reader.

  • If you need the teaching team's inputs when deciding on a bug (e.g., if you are not sure if the UML notation is correct), post in the forum. Remember to quote the issue number shown in CATcher (it appears at the end of the issue title).
Guidelines for bug triaging
General:
  • If a bug report contains multiple bugs (i.e., despite instructions to the contrary, a tester included multiple bugs in a single bug report), you have to choose one bug and ignore the others. If there are valid bugs, choose from valid bugs. Among the choices available, choose the one with the highest severity (in your opinion). In your response, mention which bug you chose.
  • What bugs can be considered duplicates? It is up to the dev team to prove conclusively that a bug is a duplicate. If the proof is not convincing enough, they will be considered as 'not duplicates'. Only the following cases can be considered duplicates:
    • The exact same bug reported multiple times.
    • Multiple buggy behaviors that are actually caused by the same defect and cannot be fixed independently.
    • In diagrams, same error appearing multiple times in the same diagram (e.g., the same notation mistake appearing several times in the same diagram). However, errors across multiple diagrams should not be flagged as duplicates, unless it is the same diagram appearing in multiple places (i.e., the same image file used in multiple places).
  • How to prove that something is 'not in scope': In general, features not-yet-implemented (and hence, not in scope) are the features that have a lower priority than the ones that have been implemented already. In addition, the following (at least one) can be used to prove that a feature was left out deliberately because it was not in scope:
    • The UG specifies it as not supported or coming in a future version.
    • The user cannot attempt to use the missing feature or when the user does so, the software fails gracefully, possibly with a suitable error message i.e., the software should not crash.
  • You can reject bugs that you i.e., the current behavior is same as AB3 and you had no reason to change it because the feature applies similarly to your new productinherited from AB3. Even bugs inherited from AB3 are counted.
Functionality bugs
  • Problems caused by very long input values: When a user input is unusually long e.g., a very long name, a very large number, it can cause problems e.g., the UI layout can get messed up, some part of it might get cut off.
    • These can be considered cosmetic issues (i.e., severity.VeryLow) of type.FunctionalityBug. Some exceptions are below:
      • The problems can only happen unless in case of deliberate sabotage (e.g., user entered a 30-digit telephone number), in which case it should not be considered a bug.
      • The problem can hinder the user (e.g., not seeing the last part of a very long name might not hinder the user but it does hinder the user if only the first few characters of the name is shown), the severity can be Low or Medium.
    • It is also fine to restrict the size/length of inputs as long as the limits are reasonable. For example, limiting the phone number to 8 digits is not reasonable unless you are targeting users whose telephone numbers are not longer than 8 digits.
  • Mismatch between the UG and the feature: If the feature behavior needs to be changed, it is either a type.FunctionalityBug or type.FeatureFlaw. But if it the UG that needs to be updated, it is a type.DocumentationBug.
Feature flaws
  • If a missing feature is essential for the app to be reasonably useful, its omission can be considered a feature flaw even if it can be proven as not in scope as given in an earlier point.
    Similarly, if the feature is implemented to work in a certain way but it could have been implemented to work in a better way (from the end-user's point of view) without much additional effort, it should be accepted as a type.FeatureFlaw, and cannot be categorized as response.NotInScope.
  • Bugs related to duplicate detection: Duplicate detection (e.g., detecting of two persons in the address book are the same) is not trivial; often, detecting only the exact string/value matches is not enough. For example, John Doe and john doe are likely to be the same person. Similarly, extra white space (e.g., the user typed an extra space between the two names) is unlikely to mean they are two different persons. Typically, it is best if you can give a warning in such near match cases so that the user can make the final decision.
    Half-baked duplicate detection can qualify as type.FeatureFlaw bugs. However, detecting more complex cases of potential duplicates can be considered as NotInScope especially if they are hard to implement and expected to be rare.
  • Overzealous input validation: It is better to warn rather than to block when inputs are not compliant with the expected format, unless accepting such inputs can hinder the operations of the software. Allowing such flexibility can allow the user to use the software in ways you didn't even anticipate while overzealous rejection of inputs can annoy the user:
    Example 1: While your software allows only one phone number in input values, a user might want to input 1234 5678 (HP) 1111-3333 (Office) -- blocking that input might not add any value but allowing it does.
    Example 2: A user might want to enter an appointment in the past, just for record keeping purposes.
    However, it is fine (and recommended) to show a warning for such inputs to guard against the deviation being a mistake rather than intentional.
    Overzealous input blocking can be considered a type.FeatureFlaw bug.
    Lack of proper handling (either blocking or warning) for potentially invalid inputs can be considered a type.FeatureFlaw bug too.
  • Specificity of error message: Error messages can be correct but not specific enough (e.g., it says the input is 'invalid' without giving the reason, or gives too many possible reasons without pointing out the specific reason). These cases can be considered type.FeatureFlaw unless making it more specific will take a lot more effort, in which case there is a chance to argue it to be response.NotInScope.
  • Unnecessarily complicated (or hard-to-type) command formats can be considered a type.FeatureFlaw as it is expected that the input formats will be optimized to get things done fast. Some examples: using very long keywords when shorter ones do, or making keywords case-sensitive when there is no need for it, using hard to type special characters in the format when it is possible to avoid them.
Documentation bugs
  • Broken links: Severity can be Low or Medium depending on how much inconvenience they cause to the reader.
  • Extra white space introduced by the PDF conversion: Not counted as bugs unless it hinders the reader. Cases such as a diagram being split between pages are considered bugs, because they hinder the reader.
  • UML notation variations caused by the diagramming tool: Can be rejected if not contradicting the standard notation (as given by the textbook) i.e., extra decorations that are not misleading.
    Omitting optional notations is not a bug as long it doesn't hinder understanding.
  • Minor typos and grammar errors: These are still considered as severity.VeryLow type.DocumentationBug bugs (even if it is in the actual UI) which carry a very tiny penalty.
  • Severity of bugs related to missing requirements (e.g., missing user stories)? Depends on the potential damage the omission can cause. Keep in mind that not documenting a requirement increases the risk of it not getting implemented in a timely manner (i.e., future developers will not know that feature needs to be implemented).
  • Unfulfilled NFRs: If the DG mentions non-functional requirements that are not met by the product, it can be a severity.Low DocumentationBug if the the NFR was unreasonable in the first place. Otherwise, it can be type.FeatureFlaw bug.
  • Details in the diagram too small: This is usually a symptom of having too much info in the diagram. A common example is sequence diagrams showing low-level details of multiple components (recommended: A sequence diagram should show internal interactions of at most one component i.e., treat other components as back boxes).
    While the reader can zoom to see smaller details, this can still be considered a cosmetic issue (i.e., severity.VeryLow).

  • Decide who should take responsibility for the bug. Use the Assignees field to assign the issue to that person(s). There is no need to actually fix the bug though. It's simply an indication/acceptance of responsibility. If there is no assignee, we will distribute the penalty for that bug (if any) equally among all team members e.g., if the penalty is -0.4 and there are 4 members, each member will be penalized -0.1.
    • If it is not easy to decide the assignee(s), we recommend (but not enforce) that the feature owner should be assigned bugs related to the feature, Reason: The feature owner should have defended the feature against bugs using automated tests and defensive coding techniques.

  • As far as possible, choose the correct type.*, severity.*, response.*, assignees, and duplicate status even for bugs you are not accepting. Reason: your non-acceptance may be rejected in a later phase, in which case we need to grade it as an accepted bug.
    If a bug's 'duplicate' status was rejected later (i.e., the tester says it is not really a duplicate and the teaching team agrees with the tester), it will inherit the type/severity/assignees from the 'original' bug that it was claimed to be a duplicate of.

  • Justify your response. For all of the following cases, you must add a comment justifying your stance. Testers will get to respond to all those cases and will be double-checked by the teaching team in later phases.

    • downgrading severity
    • non-acceptance of a bug
    • changing the bug type
    • non-obvious duplicate

  • You can also refer to the below guidelines:

PE Phase 3: Tester Response

Start: Within 1 day after Phase 2 ends.

While you are waiting for Phase 3 to start, comments will be added to the bug reports in your /pe repo, to indicate the response each received from the receiving team. Please do not edit any of those comments or reply to them via the GitHub interface. Doing so can invalidate them, in which case the grading script will assume that you agree with the dev team's response. Instead, wait till the start of the Phase 3 is announced, after which you should use CATcher to respond.

Deadline: Thu, Nov 18th 2359

  • In this phase you will get to state whether you agree or disagree with the dev team's response to the bugs you reported. If a bug reported has been subjected to any of the below by the receiving dev team, you can record your objections and the reason for the objection.
    • not accepted
    • severity downgraded
    • bug type changed
    • bug flagged as duplicate (Note that you still get credit for bugs flagged as duplicates, unless you reported both bugs yourself. Nevertheless, it is in your interest to object to bugs being flagged incorrectly as duplicates because when a bug is reported by more testers, it will be considered an 'obvious' bug and will earn slightly less credit than otherwise)
  • If you disagree with the team's decision but would like to revise your own initial type/severity/response as well, you can state that in your explanation e.g., you rated the bug severity.High and the team changed it to severity.Low but now you think it should be severity.Medium.
  • You can also refer to the below guidelines:

  • If you do not respond to a dev response, we'll assume that you agree with it.
  • Procedure:
  • When the phase has been announced as open, login to CATcher as usual (profile: CS2113/T PE).
  • For each issues listed in the Issues Pending Responses section:
    • Click on it to go to the details, and read the dev team's response.
    • If you disagree with any of the items listed, tick on the I disagree tick box and enter your justification for the disagreement, and click Save.
    • If you are fine with the team's changes, click Save without any other changes upon which the issue will move to the Issue Responded section.
  • Note that only bugs that require your response will be shown by CATcher. Bugs the team accepted exactly as you reported them (i.e., no change to type or severity) will not appear in CATcher as there is nothing for you to do about them.

You must use CATcher. You are strictly prohibited from editing PE bug reports using the GitHub Web interface as it can can render bug reports unprocessable by CATcher, sometimes in an irreversible ways, and can affect the entire class. Please contact the prof if you are unable to use CATcher for some reason.


PE Phase 4: Tutor Moderation

  • In this phase tutors will look through all dev responses you objected to in the previous phase and decide on a final outcome.
  • In the unlikely case we need your inputs, a tutor will contact you.

tP: DeliverablestP: Grading